Model ROS

Belt Misalignment Switch

 

This belt misalignment switch is used to monitor the position and tracking of conveyor belts. It is mounted on the conveyor structure and adjusted so the roller arm is the proper distance and angle from the outside edge of the belt. When a belt drifts out of alignment it contacts the roller actuator arm which rotates the actuation shaft, causing the belt misalignment switch to send an alarm signal.

Heavy duty NEMA 4 enclosure; 2 or 4 SPDT relay switches; GP or Class II, Div 1 & 2, Groups E,F, and G approvals

Technical Specifications

Primary Product Manual